- Product introduction
It is made by processing the parts of hydrogen fuel reactor system, which is required to show the structure and working principle of the composition of automotive fuel cell (hydrogen) system, and can dynamically simulate the working process of fuel cell (hydrogen) system to deepen students' understanding of the structure and working principle of hydrogen fuel system. It is suitable for the teaching needs of all types of colleges and training institutions for theoretical learning and maintenance practical training of the automotive fuel cell (hydrogen) system.
- Product function
1,The equipment completely demonstrates the working principle of fuel cell vehicle energy system, shows the advantages of low-pressure hydrogen storage of metal polymer hydrogen tank, can dynamically simulate the operation state of fuel cell vehicle energy system under resistive, inductive and other load conditions, and dynamically demonstrates the characteristics and advantages of fuel cell vehicle energy system.
2. By adopting four intelligent monitoring terminals, the 4.3-inch display can collect the principle animation of the interactive operation state of the fuel cell-related core components in real time.
3,The intelligent monitoring terminal collects the fuel cell in real time from hydrogen entering the electric stack through the diffusion layer, catalyst, proton exchange membrane, oxygen in the air, catalyst conversion to form electrical energy output conversion process. How to collect fuel cell in real time; how to realize the conversion from low voltage through ECU processor, primary coil secondary coil, rectifier bridge step-up output high voltage; how to convert the output DC power of the electric reactor through IGBT to three-phase AC power animation curve state. Monitoring terminal displaying three-phase drive motor operating status through the configuration of the acceleration pedal can achieve idle speed and acceleration and deceleration operation;.
4,The panel is installed to simulate the drive motor to reflect the output of hydrogen from the hydrogen storage tank to the fuel cell stack, which is converted into high voltage DC output through the booster to the motor controller to convert into AC output to drive the motor operation, which can fully demonstrate the structure, composition and working principle of the fuel cell system.
5, can dynamically simulate the fuel cell reactor gas supply, reactor power generation, power supply boost, capacitor charging and normal driving under five working conditions and assisted by LED running lights to reflect the energy flow state more visually.
6, configuration gear selection device can simulate the power motor R, N, D three different modes of power motor operating state. Installation of brake switch to simulate the vehicle driving brake pedal brake energy recovery state.
7, the panel needs to use ≥ 4mm thick corrosion-resistant, trauma-resistant, pollution-resistant, fire-resistant, moisture-proof senior aluminum composite panel, the panel is printed with never fade the entire automotive fuel cell layout structure and working principle schematic diagram, students can intuitively control the fuel cell automotive energy system structure schematic diagram, recognize and analyze the working principle of the fuel cell automotive energy system.
8, the table frame is composed of national standard aluminum alloy frame, using 40mm x 40mm and 40mm x 80mm two integrated full aluminum alloy profile to build, oil resistant and corrosion resistant and easy to clean, embedded 4mm aluminum plastic plate support seal, table surface pavement high-quality once formed composite plate moisture-proof and durable. The bottom is equipped with locking function universal wheels, convenient to move and fix.
- Product composition
Power drive motor simulator, motor controller, fuel cell booster, fuel cell stack, hydrogen storage tank, gear control switch, super capacitor, accelerator pedal, brake switch, hydrogen production device, mobile base frame, etc.
- Product specification parameters
Product size: 1230*600*1780mm(L×W×H)
Input power: AC220V 50Hz
Working temperature: -35ºC~40ºC
Weight of the whole machine: 70kg
Detailed Photos
Certifications
Company Profile
FAQ
Q1. Do you accept custom designs? Do you offer OEM and ODM services?
A: Yes, of course! We have over 8 years of experience in custom designed products.
Q2. What information should I provide for custom orders?
A: The more information you provide, the more we can prepare the exact solution for you.
For example. 1,technical specifications. 2,bidding process and detail requirements.
And other required information.
Q3. What is your starting order quantity?
A: Minimum one unit. Of course, the more the cheaper!
Q4. What is your payment method?
A: 100% T/T upfront for products less than $5,000. For products with a total amount greater than $5000, 50% T/T in advance and the balance before shipment.
Q5. What is the delivery time?
A. For 1-2 items, it will be sent out within 20 working days after payment. For large orders, we can deliver within 30-45 days, depending on the style and quantity.
Q6. How long is the warranty?
A. One year.
Q7. How can I get after-sales service?
A. Usually online service, and if necessary, lifetime technical support via video.
Q8. How do you control the quality?
A: We strictly follow the IS09001 standard and most of our products have passed CE certification.
Packaging & Shipping
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}