Product Description
1/6 Battery system
I. Functional characteristics:
1. Equipped with a battery power source, parts in accordance with the original car location arrangement, can run a simulation of the power battery system work process.
2. The battery shell partially dissected, and then high-grade insulated transparent board to protect the battery circuit, so that students can clearly observe the internal results of the battery.
3. And the system other bench connected, the system high-voltage power supply through the high-voltage distribution box (main contactor) sent to the motor, the controller receives the accelerator pedal, brake switch, reverse switch, gear switch and other signals to control the motor speed fast and slow and forward and reverse, the original car instrumentation shows a variety of current real-time parameters, you can observe the system energy transfer route.
II. The process standard: circuit diagram board with circuit analysis function, graphic lines using advanced aluminum plastic plate laser spray tracing and become, line distribution is reasonable, electrical installation in strict accordance with the GB national electrical industry standard organization production and implementation.
III. Teaching functions:
Skills practical training projects:
1. Power battery safety operation training
2. Power battery structure awareness training
3. Power battery BMS structure awareness training
4. Power battery sealing strip disassembly training
5. Power battery pack replacement training
Testing teaching project
1.Power battery safety testing project
2. Power battery sealing testing project
3. Power battery voltage testing project
4. Power battery temperature testing project
Experimental items:
1. Power battery capacity test, capacity data analysis experiment.
2. Power battery discharge current, charging current data analysis.
3. Power battery temperature test, over temperature protection experiment.
4. BMS data diagnosis, data analysis, data monitoring experiments.
5. Lithium battery cell charging and discharging experiment
2/6 Charging system
I. Functional requirements
1. The real runnable new energy vehicle charging system, connected with the other stations of the system, completes the composition structure and working process of the new energy vehicle charging system.
2. The training table measurement panel is painted with colorful spray-painted circuit diagrams, using 4mm thickness of high-strength aluminum plastic plate spray-painted from, with a large temperature difference, wear-resistant, moisture-proof, anti-corrosion, not easy to deformation, long service life, bright colors, not easy to fade and so on. The panel is printed with colorful circuit diagrams that will never fade, and the surface is sprayed with varnish; students can visually compare the circuit diagrams and the actual electric vehicle drive system to recognize and analyze the working principle of the control system.
3. There are test terminals installed on the panel of the training table, which can directly detect the electrical signals of the control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc.
II. The process standard: circuit diagram board with circuit analysis function, graphic lines using aluminum plastic plate laser spray tracing and become, beautiful and generous. Bench base using national standard aluminum profiles assembled, the base is installed with universal mobile casters, line distribution is reasonable, electrical installation in strict accordance with the GB national electrical industry standard organization production and implementation.
III. Teaching functions:
Skill practical training projects:
1. Charging system and other systems harness connection running practical training projects
2. Charging system construction principle teaching practical training project
Testing teaching projects:
- Charging system signal detection teaching project
2. Diagnostic testing of charging system
3/6 Drive system
I. Functional requirements
1. Real runnable new energy vehicle drive system, and the system other bench connected to complete the composition of the new energy vehicle drive system structure and working process.
2. The training table measurement panel is painted with colorful spray-painted circuit diagrams, using 4mm thickness of high-strength aluminum plastic plate spray-painted from, with a large temperature difference, wear-resistant, moisture-proof, anti-corrosion, not easy to deformation, long service life, bright colors, not easy to fade and so on. The panel is printed with colorful circuit diagrams that will never fade, and the surface is sprayed with varnish; students can visually compare the circuit diagrams and the actual electric vehicle drive system to recognize and analyze the working principle of the control system.
3. There are test terminals installed on the panel of the training table, which can directly detect the electrical signals of the control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc.
II. The process standard: circuit diagram board with circuit analysis function, graphic lines using aluminum plastic plate laser spray tracing and become, beautiful and generous. Bench base using national standard aluminum profiles assembled, the base is installed with universal mobile casters, line distribution is reasonable, electrical installation in strict accordance with the GB national electrical industry standard organization production and implementation.
III. Teaching functions:
Skill practical training projects:
1. The decomposition and assembly of the motor assembly practical training projects
2. Mechanical transmission assembly decomposition and assembly practical training projects
3. Familiar with the name, structure and principle of each component
Testing teaching projects:
- Driving system working signal voltage detection teaching project
- Driving motor working speed signal detection teaching project
3. Drive system fault diagnosis, testing teaching projects
4. Driving motor temperature signal detection teaching project
4/6 Air conditioning system
I. Functional requirements
1. After this training table is connected with other system training tables, demonstrate the heating principle and control mode of electric warm air.
2. Demonstrate the working principle and control process of electric air conditioning and compressor.
3. To realize the air-conditioning cooling intensity adjustment, wind speed control, air supply port control, internal and external circulation control.
4. Realize the air conditioning system pipeline pressure view and detection.
5. Understand the operation characteristics and diagnosis method of air conditioning system through the demonstration board
6. Realize the fault setting and diagnosis analysis of the system
7. Master the electric high-pressure air conditioning maintenance when the safety operation norms.
II. The process standard: circuit diagram board with circuit analysis function, graphic lines using aluminum plastic plate laser spray tracing and become, beautiful and generous. The base of the stand is made of national standard aluminum profiles assembled, the base is installed with universal mobile casters, solid science. Line distribution is reasonable, electrical installation in strict accordance with the GB national electrical industry standard organization production and implementation.
III. Teaching functions:
Skills practical training projects:
1. Master the structure principle and working principle of electric vehicle air conditioning system
2. Disassembly and assembly of air-conditioning pipeline training program
3. Air conditioning compressor disassembly and assembly training program
4. Air conditioning refrigerant evacuation and refilling training program
Testing teaching projects:
1. Air conditioning compressor working voltage detection teaching
2. Air conditioning control unit data, signal detection teaching
3. Air conditioning system cooling and heating control signal detection teaching
4. Air conditioning system fault diagnosis, detection teaching
5/6 Power steering system
I. Functional requirements
1. This training table is connected with other system training tables to demonstrate the principle of electric steering and the control mode.
2. Demonstrate the working principle and control process of electric steering.
3. Realize electric power steering control.
4. To realize the steering system composition structure viewing and testing.
5. Understand the operation characteristics and diagnosis method of electric power steering system through the demonstration board.
6. To realize the fault setting and diagnostic analysis of the system.
7. Master the electric power steering system maintenance when the safety operation specification.
II. The process standard: circuit diagram board with circuit analysis function, graphic lines using aluminum plastic plate laser spray tracing and become, beautiful and generous. The base of the stand is made of national standard aluminum profiles assembled, the base is installed with universal mobile casters, solid science. Line distribution is reasonable, electrical installation in strict accordance with the GB national electrical industry standard organization production and implementation.
III. Teaching function:
Skill practical training projects:
1. Master the structure principle and working principle of electric vehicle steering system
2. Electric vehicle steering system disassembly and assembly training project
3. Disassembly and assembly of electric vehicle steering machine
4. Practical training project with and without steering assistance
Testing teaching items:
1. Electric power steering machine working voltage testing teaching
2. Steering control unit data and signal testing
3. Teaching of steering system control signal detection
4. Teaching of steering system fault diagnosis and testing
6/6 Full vehicle electrical system
- Product overview:
The equipment adopts pure electric car body electrical appliances as the basis, fully demonstrating the body electrical composition structure and working process. It is suitable for the teaching needs of pure electric vehicle body electrical theory and maintenance practical training in middle and higher vocational and technical colleges, general education colleges and training institutions.
- Main components:
Lighting system, door and window system, wiper system, audio system, rearview mirror system, movable table, universal casters with lock, etc.
3. Functional features
(1) Tthe training table measurement panel painted with colorful spray-painted circuit diagrams, using 4mm thickness of high-strength aluminum spray-painted panels, with a large temperature difference, wear-resistant, moisture-proof, corrosion-resistant, not easy to deform, long service life, bright colors, not easy to fade and so on.
(2) The training table will be the whole car electrical in the form of flat unfolded, the systems are fixed according to the relative position of the original car, the line is clear, consistent with the original car system, convenient detection, simple operation.
(3) The panel of the training bench is installed with detection terminals, which can directly detect the electrical signals of sensors and actuators on the panel, such as resistance, voltage, current, frequency signals, etc.
(4) The training table is built with international standard aluminum alloy profile, with light quality, high strength, corrosion resistance, long life, etc., without the need to go through the spraying process, more environmentally friendly, more beautiful and high-grade appearance, the table frame with self-locking casters, mobile and flexible, safe, reliable, durable.
|
Material
|
Steel
|
|
Warranty
|
1 Year
|
|
Certificate
|
IS09001 /1S014001/CE
|
|
Applicetion
|
Automotive College and School
|
|
MOQ
|
1 Set
|
|
Package
|
Wooden Box
|
|
Place of origin
|
Guangdong. China
|
FAQ
Q1.DO YOU ACCEPT CUSTOMIZED DESIGN? DO YOU OFFER OEM & ODM SERVICE?
A: Yes, of course! We have over 9 years' experience in customized design product.
Q2.WHAT INFORMATION SHOULD I PROVIDE FOR A CUSTOMIZED ORDER?
A: The more information you provide, the accurate solution we can prepare for you.
Such as: 1. Tenical Specification. 2. Tender process and detail requirement and other information required.
Q3.WHAT IS YOUR MOQ?
A: One unit.The more the better. The price is negotiable for large quantity.
Q4.WHAT IS YOUR PAYMENT TERM?
A: For Total ≤5000 USD, 100% T/T in advance. For Total > 5000 USD, 50% T/T in advance, balance before shipping.
Q5.WHAT IS THE DELIVERY TIME?
A: For 1-2 items,send out in 20 workdays after payment. For Large order, we can deliver in 30-45 days. lt's based on what's kinds of styles and the quantity.
Q6.HOW LONG IS THE WARRANTY TIME?
A: One year.
Q7.HOW CAN I GET THE AFTER-SALES SERVICE?
A: Usually online and vedio if necessary. Lifetime technical support.
Q8.HOW DO YOU DO TO CONTROL QUALITY?
A: We comply with IS09001 standards strictly and most of our products are CE approved.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}