| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic parts
1. Experimental bench
The experimental bench is composed of aluminum profile main frame, aluminum profile operation panel, electrical cabinet, etc.
Workbench size: length×width×height=1500mm×700mm×1850mm (the packing weight is about 220kg), and the aluminum alloy profile structure with "T" groove on the mounting surface
2. Hydraulic pump station
Rated working pressure of the system: 0.8 Mpa. Up to 2.5MPa
(1) Motor-pump device (set)
The pump can choose any of gear pump, cycloid pump, vane pump, etc. Motor: DC motor, power 400W, speed 0~1500r/min; speed regulation by DC speed regulator. Built into the experiment table.
(2) Fuel tank: nominal volume 30L; with liquid level, oil temperature indicator, oil suction and return oil filter, safety valve, etc.
3. Power supply:
With three-phase leakage protection, the output voltage is 380V/220V, the power supply will be cut off when the leakage current to the ground exceeds 30mA; the electrical control adopts DC 24V power supply, and with overvoltage protection to prevent misoperation from damaging the equipment.
4. Electrical control unit:
Programmable controller (PLC);
adopts FX1S-20MR, I/O port 20 points;
12 inputs and 8 outputs, relay output form.
Power supply voltage: AC 220V/50Hz
5. When the hydraulic pump is working, the noise at a distance of 1.5m from the hydraulic platform is ≤58dB
Pneumatic Parts
main feature:
1. Component modularization: Each pneumatic component is an independent module, equipped with a bottom plate that is easy to install, and various experimental circuits can be set up on the general aluminum alloy profile plate at will, and the operating parts are simple and fast.
2. Connection mode: The connector adopts quick-type, reliable, simple and time-saving during installation and disassembly.
3. Pneumatic components: standard industrial pneumatic components, reliable and safe.
4. System environment: low-noise working pumping station, providing a quiet experimental environment (noise <60). Pump station with automatic overpressure protection device
5. Control diversification: PLC programming control, relay manual control, time relay control automatic control
The composition of the test bench:
The test bench is composed of test benches, working pump stations, pneumatic components, and electrical control units.
1. Experimental bench:
The experimental bench is composed of national standard 40*40 national standard aluminum as the main body, aluminum alloy operation panel, etc.
Worktable size: length×width×height=1500mm×650mm×1700mm (the packaging weight is about 300kg)
2. Working pump station:
Air pump input voltage: AC 220V/50Hz
Motor (single head) power: 550W
Rated output pressure: 0.8Mpa
Air pump volume: 10L
Working noise: <50 decibels
3. Pneumatic components:
Mainly Tiangong pneumatic components, please refer to the appendix for configuration details.
Pneumatic components are equipped with transitional bottom plates, which can be conveniently and freely placed on the experimental panel (aluminum alloy profile structure in the form of a "T" groove on the panel). The loop lap connection adopts quick-change joints, which is convenient and quick to disassemble and connect.
4. Electrical control unit:
Programmable controller (PLC);
adopts FX1S-20MR I/O port 20 points;
12 inputs and 8 outputs relay output form.
Power supply voltage: AC 220V/50Hz
){kind=link}